105007
Aquamor BGC · Twin
BGC Twin Manifold, 3/4 in NPT + 1/2 in Barb, Rinse Valve and Pressure Gauge
The 105007 is a two-cartridge parallel BGC manifold, stepped up to 3/4 inch NPT plus a 1/2 inch barb to carry the added flow of a two-cartridge bank. Rinse valve and pressure gauge are standard. It is the flow-capacity counterpart to the 105005 series head, sized for a location that needs more volume rather than more treatment steps.
Two cartridges sharing the load, in parallel
Scroll the diagram sideways to see the full flow path.
A twin manifold splits incoming water across two cartridges running side by side, then recombines the two streams on the outlet side. Each cartridge only treats its own share of the flow. Splitting the load this way raises the combined flow rate the manifold can support and stretches the combined capacity before either cartridge is due for a changeout, while the level of filtration each gallon receives stays the same as a single cartridge would provide.
Typical application. Equipment or a location that draws more water than a single cartridge comfortably supports.
| Part Number | 105007 |
|---|---|
| Series | Aquamor BGC |
| Configuration | Twin |
| Flow Arrangement | Two cartridges in parallel |
| Filter Heads | 2 |
| Port Size | 3/4 in NPT + 1/2 in barb |
| Rinse Valve | Yes |
| Pressure Gauge | Yes |
| Mounting | Wall mount |