Aquamor BGC  ·  105013
BGC Manifolds

105013

Aquamor BGC  ·  3+1

Application

BGC 3+1 Manifold, 3/4 in NPT + 1/2 in Barb, Rinse Valve and Pressure Gauge

The 105013 pairs the three-cartridge parallel bank of the 105011 with a fourth cartridge in series, on 3/4 inch NPT plus 1/2 inch barb ports, with rinse valve and pressure gauge standard. It is built for higher-flow sites that also need a dedicated polish stage on the full recombined stream.

Three cartridges in parallel, then a polish stage

BGC 3+1 flow pathWater enters a single inlet line and divides at a distribution header into 3 equal branches, one for each of 3 filter cartridges arranged in parallel. The 3 branches rejoin at a collection header into a single line, and all of that combined flow then passes through one additional cartridge in series, a final polish stage, before reaching the outlet. Every drop of water passes through the polish stage; only the first bank of cartridges splits the flow.3 PARALLEL, THEN 1 IN SERIESBANK SPLITS FLOW; FINAL STAGE TAKES ALLINLET1A1B1CStage 2POLISH STAGEOUTLET

Scroll the diagram sideways to see the full flow path.

A 3+1 manifold splits incoming water across three cartridges running side by side, recombines the flow, then runs every gallon through a fourth cartridge in series. The three-cartridge bank carries the flow rate and capacity; the fourth cartridge downstream is a polish stage the whole recombined stream passes through once, adding a treatment step rather than more volume.

Typical application. Higher-flow sites that also need a dedicated final treatment stage, such as scale reduction, on the combined output.

Part Number 105013
Series Aquamor BGC
Configuration 3+1
Flow Arrangement Three in parallel, then one in series
Filter Heads 4
Port Size 3/4 in NPT + 1/2 in barb
Rinse Valve Yes
Pressure Gauge Yes
Mounting Wall mount
More in the Aquamor Manifolds range
Ready to spec this manifold?
Our Customer Service team will route your inquiry to the right people: engineering, sales, or support. Response the same business day.
Contact Customer Service
Aquamor BGC 3+1 filter manifold, part number 105013
Product Line Aquamor BGC filter manifolds. See the full manifold line.