Aquamor BGX-C  ·  105212
BGX-C Manifolds

105212

Aquamor BGX-C  ·  Single

Application

BGX Single Manifold, 3/8 in NPT, Rinse Valve and Pressure Gauge

The 105212 is the fully equipped single-cartridge BGX manifold on 3/8 inch NPT, with both a rinse valve for flushing a new cartridge and a pressure gauge for reading inlet pressure. It is the top of the 3/8 inch BGX single-head options, ahead of the 105210 and 105211 builds that omit one or both features.

One cartridge, all the water

BGX-C Single flow pathWater enters at the inlet, flows through one filter cartridge, and exits at the outlet. All of the incoming water passes through the single cartridge.SINGLE CARTRIDGEALL FLOW THROUGH ONE STAGEINLETCartridgeOUTLET

Scroll the diagram sideways to see the full flow path.

A single-head manifold routes all incoming water through one cartridge before it leaves the manifold. There is nothing to split and nothing downstream for the water to pass through again: the cartridge installed is doing the entire job. It is the simplest arrangement in this lineup, and the most straightforward to service because there is only one cartridge to track and change.

Typical application. Lower-volume applications, a single piece of equipment, or any spot where one cartridge's flow rate and capacity are enough.

Part Number 105212
Series Aquamor BGX-C
Configuration Single
Flow Arrangement Single stage
Filter Heads 1
Port Size 3/8 in NPT
Rinse Valve Yes
Pressure Gauge Yes
Mounting Wall mount
More in the Aquamor Manifolds range
Ready to spec this manifold?
Our Customer Service team will route your inquiry to the right people: engineering, sales, or support. Response the same business day.
Contact Customer Service
Aquamor BGX-C Single filter manifold, part number 105212
Product Line Aquamor BGX-C filter manifolds. See the full manifold line.